How to Evaluate and Choose a Mass Notification System

how to choose a mass notification system

Picking an alerting platform under pressure is stressful, and you want it right. Here is how to choose a mass notification system: define who you must reach, whether you need replies, and test vendors against those needs.

This guide is part of a wider look at the mass notification system category.

Item Value
Message direction One-way messages
Delivery channels Email, smartphones, office phones and home phones
Standard for a request for proposal NFPA 72 (National Fire Alarm and Signaling Code)
Vendor references to collect Several from each vendor
Channel breadth of one listed vendor Up to 25 different communications paths
Source publication date Aug. 31, 2021

These figures come from TechTarget’s guide to mass notification system vendors. Products and standards change, so check the source before you rely on them.

What a mass notification system does

A mass notification system sends one-way messages by email, smartphones, office phones and home phones to inform staff and the public of an emergency, as TechTarget’s 2021 guide describes it. Behind those messages sits a contact database and a delivery engine meant to reach everyone as quickly as possible.

Sending does not have to depend on a person. Organizations can start a message by hand or set it to go out automatically, and the same source names several possible triggers:

  • Heat, smoke, gas and chemical detectors
  • Water sprinkler activation
  • Discharge of fire extinguishing equipment

The source also notes that organizations can build interfaces to other specialized systems, such as elevators, HVAC and building security. A separate guide covers the mass notification system features worth comparing in more detail.

Start with your requirements

Before you look at any product, sit down with your internal facilities and emergency management teams. Systems vary widely in scope and capability, so the requirements need to exist before the vendor conversations begin.

The source says to assess the type of message, company size, cost and the location of employees. Work through these steps in order:

  1. Decide whether messages only need to go out, or whether people must be able to answer.
  2. List exactly who must be notified in an emergency.
  3. Note the kinds of message you expect to send and where your people work.
  4. Set a budget range so cost is weighed against capability from the start.

The reply question matters most. If information only ever moves one way, an emergency notification system or a mass notification system will both work, but a team that needs two-way return messages may be better served by an emergency notification system.

Match the system to your audience

Each product is built with a particular kind of customer in mind. According to the TechTarget guide, some are designed for corporations, while others are intended for schools or government agencies. Education settings raise their own questions, which the campus emergency notification system guide covers separately.

Scale of audience changes the answer too. A public utility might need to alert an entire community in a serious emergency, whereas a business may only need to reach its own employees.

Colleagues gather around a conference table as two people shake hands.

How should you evaluate vendors?

Once your requirements are written down, the source suggests using NFPA 72 to prepare a request for proposal. It describes NFPA 72 as the National Fire Alarm and Signaling Code, a standard from the National Fire Protection Association, used in the U.S. to guide a project from application and installation through testing and maintenance, per TechTarget.

The proposal should name prospective suppliers. Then collect references: the guide advises obtaining several from each vendor and contacting them. Useful questions for those references include:

  • Did anything go wrong during planning?
  • How did installation go?
  • Was training adequate?
  • How did the system perform after cutover?

Vendor descriptions in the same article show how much capability differs. As of its 2021 publication, one listed vendor was described as supporting up to 25 different communications paths, and another as used by government agencies and with FEMA’s Integrated Public Alert and Warning System. Treat such descriptions as prompts for your own questions, not as a ranking, and confirm current details with each supplier directly.

Final checks before you commit

The more preparation an organization does before a crisis, the better. The source offers a closing checklist so response teams do not miss anything:

  • Confirm that electronic and hard-copy documentation is provided and kept in multiple secure locations.
  • Make sure you have a server, power supply, backup power and enough processing capacity for the system and its database.
  • Check that your network has enough bandwidth for the bursts of traffic an emergency can generate.

Allow enough time for testing and training as well, since a system nobody has practiced with is a weak point. This site is independent and does not send alerts; for personal safety steps, follow your official local emergency authorities.

Frequently asked questions

What separates a mass notification system from an emergency notification system?

Show answer

In TechTarget’s explanation, the dividing line is replies. The emergency version lets the recipient answer the sender, while the mass version is built around outbound messages.

Which standard can shape a request for proposal?

Show answer

The TechTarget guide points to NFPA 72, the U.S. fire alarm and signaling code. It is meant to be used once your requirements are settled.

Can an alert go out without anyone pressing a button?

Show answer

Yes. A sensor such as a smoke or gas detector can start a message on its own, and staff can still send one manually when a situation calls for judgment.

Does my own infrastructure matter?

Show answer

It does. Plan for spare server capacity, backup power and network headroom, because an emergency can create sudden surges in traffic.